Otherwise Select No to enter the Input Summary page and Start the mission. Optionally select Yes to configure additional advanced settings. Step 7 - Enter and Edit Advanced Settings You can trigger the camera manually if desired. Select Next and select the media to capture. Info: You can re-mark a location if you want to adjust it by selecting the red circle next to the marked location. In this example we mark 3 locations with different altitudes and framing. This will show a pin on the map preview on the bottom left, and will display a GPS coordinate next to the Mark button.īefore selecting next, continue to fly to and Mark additional waypoints. (The framing can be used to control the drone rotation and gimbal) Take-off and position the drone at the location you want your first waypoint at. Ensure you have sufficient space on your SD card.Make sure you have sufficient battery on both the drone and your RC.Make sure you are connected to sufficient satellites (we recommend over 10).Make sure that you are in Normal, or Positioning P-mode on your DJI controller.If you do, use the DJI app to perform any required drone calibrations. Check that you are seeing a green status bar at the top of the Dronelink app, indicating that you don't have any warnings or errors.Let's review the most important indicators highlighted below. The Dronelink app will open showing the drone preview, drone status, along with common indicators and controls, a map preview and compass, and the Waypoints Path function step-by-step guide. Make sure that your drone is safe and ready to fly. Step 2 - Open the Waypoints Path on-the-fly function Once connected, the drone will display on the top right. On your first login Dronelink will automatically open to the on-the-fly functions page (lighting bolt menu icon). Open the Dronelink App, login, and connect your drone. Step 1 - Open the Dronelink App and Connect Your Drone Mark locations within a clear line of sight of your take off location and keep the altitude changes minimal. Info: For your first Dronelink mission, select an open field in a legal flight zone, and mark your waypoints well above any obstacles. This video show how to run a waypoints path and follow on-the-fly mission using the Dronelink mobile app, and covers a few Dronelink app basics. Just use the Dronelink mobile app to generate a mission using your drone position as you follow step-by-step instructions. On-the-fly functions are the easiest way to get started using Dronelink and does not require mission planning in advance.

Expert gps delete a waypoint from map